Low Line Only Low Profile T8, Isolated 23 W, Power Factor Corrected (PF >0.98), LED Driver Using LYTSwitchTM LYT4215E
This document describes a cost-effective power supply utilizing the LYTSwitchTM-0 family (LYT0006D) in a highly compact buck topology. This power supply operates over an input voltage range of 190 VAC to 265 VAC. The DC bus voltage is high enough to support an 85 V output when using a buck topology - in a buck converter the output voltage must always be lower than the input voltage. The output voltage is also limited by the maximum duty cycle of the LYTSwitch-0 (which also requires the input voltage to be larger than the output voltage). The reference design is not limited for retrofit lamp application; the design layout can be easily modified to fit in LED tube or ballast applications.
This document describes a non-isolated, power factor corrected, low THD, high-efficiency LED driver designed to drive a 144 V LED string at 180 mA from an input voltage range of 90 VAC to 265 VAC.
The document describes a non-isolated, high power factor (PF), high efficiency, TRIAC dimmable LED driver designed to drive a nominal LED string voltage of 41 V at 350 mA from an input voltage range of 195 VAC to 265 VAC (50 Hz typical).
This engineering report describes a non-dimmable, boost LED driver designed to drive a 385 V LED voltage string at 48 mA from an input voltage range of 195 VAC to 265 VAC. The LED driver utilizes the LYT5225D from the LYTSwitch-5 family of devices.
This engineering report describes a constant voltage (CV) output 8.4 W isolated flyback power supply with a single stage power factor correction circuit for smart lighting applications. The power supply is designed to provide a 24 V constant voltage across 0mA to 350 mA output current load. The board is optimized to operate with an input voltage range of 90 VAC to 265 VAC.
10 W Adapter for Portable Audio Players with Latching Overvoltage and Over-Temperature Shutdown Protection
High Effi ciency Inkjet Power Supply Provides up to 80 Watts of Peak Power
7 W Wide-Range Input, Dual Output, Non-Isolated Flyback Converter Using LinkSwitch-XT2 900 V (LNK3696P)
7 W Wide-Range Input, Dual Output, Non-Isolated Flyback Converter Using LinkSwitch-XT2 900 V (LNK3696P)
6.6 W wide-range input, dual output, isolated flyback converter for anti-magnetizing interference in utility meters using 900 V LinkSwitch-XT2 (LNK3696P)
0.48 W non-isolated power supply with lossless generation of AC zero-crossing signal using LinkSwitch-TNZ (LNK3302D)
10 W isolated flyback power supply with lossless generation of AC zero-crossing signal and X capacitor discharge using LinkSwitch-TNZ (LNK3317D)
6 W isolated flyback power supply with lossless generation of AC zero-crossing signal using LinkSwitch-TNZ (LNK3306D)
2.5 W Non-Isolated Power Supply with Lossless Generation of AC Zero-Crossing Signal using LinkSwitch-TNZ
Two-wire forward/reverse phase Bluetooth low-energy (BLE) smart dimmer switch using LinkSwitch-TNZ (LNK3302D) with lossless AC zero-crossing detection
Low Standby Current, Non-Isolated Flyback Power Supply Using LinkSwitch-TN2 (LNK3202D)
1.44 W Non-Isolated Buck Converter Using LinkSwitch-TN2 900 V (LNK3294G/P)
2.75 W non-isolated buck converter for home and building automation using LinkSwitch-TN2 (LNK3207D)
6.6 W non-isolated buck converter for small appliances using LinkSwitch-TN2 (LNK3207D)
